paper container leak detection machine, 140‑180 pcs/min non‑destructive gas pressure paper cup leak inspecting equipment
CLJ-Ⅰ

Automatic Paper Container Leak Detection Machine

Non-Destructive Gas Testing

Automatic Leak Detection

Automatic Defect Rejection

140–180 Cups/min

The CLJ-Ⅰ Automatic Paper Cup Leak Detection Machine is designed for non-destructive leak testing in paper cup production. It uses a low-pressure gas testing method to identify leakage caused by pinholes, side seam defects and insufficient bottom sealing, then automatically rejects non-conforming cups. With a rated processing speed of 140–180 pcs/min, it helps manufacturers strengthen cup sealing quality control and reduce reliance on manual leak inspection.

  • Processing Speed: 140‑180 pcs/min
  • Rated Power: 3Kw
  • Air Consumption: 2.5 m³/min
  • Testing Method: Non-Destructive
Optional functions
  • Inspection
  • Paper Blank Feeder
Request Quote

Product Comparison

General Description

The CLJ-Ⅰ Automatic Paper Cup Leak Detection Machine is designed to inspect the sealing quality of paper cups during production. It provides non-destructive leak testing to identify leakage caused by pinholes, defective side seams and insufficient bottom bonding, helping manufacturers detect defective cups before they proceed to subsequent production stages.

Non-Destructive Gas Pressure Testing

The machine uses a low-pressure gas testing method to inspect the sealing integrity of paper cups. During testing, low-pressure gas is injected into the interior of the cup while pressure changes are monitored externally. The system identifies potential leakage points and structural weaknesses, including pinholes and defects in side seam and bottom bonding areas.

Automatic Defect Detection and Rejection

After testing, cups identified as non-conforming are automatically rejected from the production flow. This integrated inspection and rejection process helps reduce reliance on manual leak testing, improve quality control consistency and prevent defective paper cups from proceeding to subsequent production stages.

The CLJ-Ⅰ is designed for round paper cups with rim diameters of 50–140 mm and heights of 80–127 mm, with a specified processing speed of 140–180 pcs/min.

Parameters

Parameter Specification
Applicable Cup Type Round Paper Cups
Cup Rim Diameter 50–140 mm
Cup Height 80–127 mm
Processing Speed 140–180 pcs/min
Power Supply 3-Phase, 380V
Rated Power 3 kW
Compressed Air Pressure 0.5 MPa
Air Consumption 2.5 m³/min
Seal-in Pressure 7 kPa
Holding Time 4.5 s (at 180 pcs/min)
Touchscreen 10-inch
Machine Dimensions 2460 × 2010 × 1900 mm (L × W × H)
Machine Weight 3,500 kg

Functions

Core Selling Points of Automatic Paper Container Leak Detection Machine

Smart Touchscreen Control and Hardware Monitoring
The CLJ-Ⅰ is equipped with a 10-inch touchscreen interface that allows operators to adjust operating parameters and monitor machine status. When an abnormal condition occurs, the system displays corresponding alarm information and troubleshooting prompts, helping operators identify issues and reduce unnecessary downtime.
High-Precision Gear-Driven Transmission
The machine adopts a high-precision gear-driven transmission system designed for stable mechanical operation and long-term use. Its mechanical configuration supports consistent equipment operation and helps reduce maintenance requirements under appropriate operating conditions.
CE Compliance and Machine Safety
The CLJ-Ⅰ is presented with CE compliance as part of its equipment specifications. Relevant conformity documentation should be provided to buyers to support their evaluation of machine safety and applicable market requirements.

End-to-End Support

Better Services And Products from Support And Trust

Pre-sales

support-1.webp

Consulting services

The company has a professional sales team that can provide customers with comprehensive product consulting services. Whether you have questions about the technical parameters, performance characteristics, or application areas of the equipment, we will patiently answer your questions to ensure that you purchase the most suitable product.
support-2.webp

Solution Design

We offer customized solution design services, tailoring the most appropriate equipment configuration plans to meet our clients' specific needs. With extensive industry experience and technical expertise, we ensure the feasibility and efficiency of our solutions.
support-3.webp

Factory inspection

We can arrange for customers to visit our company and production sites according to their needs, so that they can gain a more intuitive understanding of our products and production capabilities.

During sale

support-1.webp

Delivery guarantee

We strictly adhere to the delivery dates specified in the contract for production and delivery to ensure that customers receive the required equipment on time. In the event of special circumstances, we will communicate with customers in a timely manner and make every effort to meet their needs.
support-2.webp

Shipping Arrangements

We have established long-term partnerships with multiple logistics companies to provide our customers with safe and efficient transportation services.

After-sales

support-6.webp

Warranty service

Our equipment warranty period is 12 months after successful installation and commissioning.
support-6.webp

Installation & commissioning

The company has a team of experienced technical service personnel who can provide professional installation and commissioning services upon request to ensure that the equipment operates normally in the customer's factory.
support-6.webp

Technical training

Provide customers with comprehensive technical training services to ensure that they are proficient in the use and maintenance of equipment.
support-6.webp

Spare parts supply guarantee

Equipped with a specific list of wear parts, stock standard spare parts for various machine types to ensure timely replacement during repairs.
support-6.webp

Continuous improvement and optimization

Regularly analyze and summarize customer feedback to identify shortcomings in products and services. Address these issues by organizing discussions among relevant departments to formulate improvement measures and optimization plans, continuously improving product quality and after-sales service levels to enhance customer satisfaction.

Customers' Questions and Answers About Ancillary Equipments

What is an automatic paper cup leak detection machine?

An automatic paper cup leak detection machine is used to test the sealing integrity of paper cups during production. The CLJ-Ⅰ uses a non-destructive gas pressure testing method to identify potential leakage points and automatically reject non-conforming cups.

How does the CLJ-Ⅰ paper cup leak detection machine work?

The machine injects low-pressure gas into the interior of the paper cup while monitoring pressure changes externally. By analyzing the test results, it identifies leakage caused by pinholes, side seam defects and insufficient bottom bonding, helping detect cups with sealing problems.

What types of paper cup leakage can the machine detect?

The CLJ-Ⅰ is designed to identify leakage associated with pinholes, defective side seams and insufficient bottom sealing or bonding. The actual detection capability depends on the machine's testing configuration and the specified leakage criteria.

What paper cup sizes are compatible with the CLJ-Ⅰ?

The machine is specified for round paper cups with rim diameters ranging from 50 to 140 mm and cup heights from 80 to 127 mm. Buyers should provide their cup dimensions for compatibility confirmation before ordering.

What is the processing speed of the paper cup leak detection machine?

The specified processing speed of the CLJ-Ⅰ is 140–180 pcs/min. Actual operating suitability should be assessed against the cup specifications and production line requirements.

Does the leak testing process damage paper cups?

No. The CLJ-Ⅰ uses a non-destructive gas pressure testing method. It is designed to inspect cup sealing integrity without intentionally damaging the paper cups during the testing process.

Does the machine automatically reject defective paper cups?

Yes. The machine integrates leakage detection with automatic rejection. Cups identified as non-conforming are automatically removed from the production flow, helping reduce the need for manual inspection and sorting.

What are the power and compressed air requirements?

The CLJ-Ⅰ requires a three-phase 380V power supply and has a rated power of 3 kW. Its specified compressed air requirements are 0.5 MPa pressure and 2.5 m³/min air consumption. Buyers should confirm the availability of suitable electrical and compressed air supplies before installation.

What are the dimensions and weight of the CLJ-Ⅰ machine?

The machine measures approximately 2460 × 2010 × 1900 mm (L × W × H) and weighs around 3,500 kg. These specifications should be considered when planning factory floor space, equipment positioning and transportation.

What information should I provide when requesting a quotation?

To evaluate machine compatibility, buyers should provide their paper cup rim diameter, cup height, required production speed and existing production line configuration. Information about the required leakage testing standards and quality control requirements will also help the technical team assess the appropriate solution.

Related Products

wire scan inspection machine, 240 pcs/min multi‑station non‑contact line‑scan paper cup visual inspection equipment

Automatic Paper Cup Visual Inspection Machine

Multi‑Station Coverage: Three dedicated inspection points ensure no defect area is overlooked.High‑Speed, Non‑Contact Sc...
Intelligent Paper Lid Machine

Intelligent Paper Lid Machine

ZGj-IV Intelligent Paper Lid Machine is mainly used for the production of paper cup lids with paper cup diameter less th...
Automatic Medium Speed Paper Lid Machine

Automatic Medium Speed Paper Lid Machine

The ZGJ-Ⅲ paper lid forming machine ensures fast and precise manufacturing of paper cup lids by utilizing advanced formi...
home-37.webp
Customer satisfaction is a daily concern at Machinery Manufacturing Group, both in our solutions for paper cup machines and in our services related to them. Click here to learn more about the topics that our customers care about.

GET A QUOTE

0
Service & Support

Our paper cup machine service is supported by a dedicated team of professionals, from providing pre-sales advice and customizing machines to meet specific production requirements, to providing ongoing post-sales support and guidance.

  • Genuine parts ensure long-term availability
  • Seamless installation by technicians
  • Digital back-office management and compatible systems
mb-1.webp
Products and solutions to support a wide range of production needs
Exhibitions
Exhibitions
We value your privacy
We use cookies to provide you with a better online experience, analyse and measure website usage, and assist in our marketing efforts.
Accept All
Service & Support

Our paper cup machine service is supported by a dedicated team of professionals, from providing pre-sales advice and customizing machines to meet specific production requirements, to providing ongoing post-sales support and guidance.

  • Genuine parts ensure long-term availability
  • Seamless installation by technicians
  • Digital back-office management and compatible systems
mb-1.webp
Products and solutions to support a wide range of production needs
×